DP-TX350 DP-TX450 Texture / Plaster Sprayer with Peristaltic Pump

DP-TX350 DP-TX450 is specially designed Peristaltic Pump for spraying texture, and also for all textured plasters, cement plaster, putty, gypsum etc with a grain size up to 3 mm, fillers and EIFS adhesives, etc.

Specifications of DP-TX350 DP-TX450 peristaltic pumps texture spray machine:

Model No.	DP-TX350 Peristaltic Pump(without air compressor)	DP-TX450 Peristaltic Pump(without air compressor), DP-TX450C with air compressor
Voltage/frequency	220V/50Hz	220V/50Hz
Motor power	1200W Brushless DC	1800W Brushless DC
Max. output delivery	6L/min	8L/min
Hopper capacity	50L	50L
Max. grain size	3mm	3mm
Max. pressure	55bar	55bar
Max. delivery height	20M	30M
N.W./G.W.	70/96kgs	72/106kgs
Wooden Case Dimension	85*62*109cmcm	98*62*109cm
Standard Accessories	1pc Texture Spray Gun(with 4 tips), 1pc Texture Hose(10m), 1set Tool Kit,  1pc Manual	1pc Texture Spray Gun(with 4 tips), 1pc Texture Hose(10m), 1set Tool Kit,  1pc Manual

Required Airless Compressor for DP-TX350/DP-TX450: 0.9CBM/7.5KW minimum

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Nozzle size: 4, 6, 8, 10mm four size available for different application such as spraying texture, putty, cement plaster, white cement, gypsum, lime based coating, or gypsum plaster, stucco, texture etc. (only 2 nozzles are standard in the package)

This peristaltic pump texture sprayer has built-in air-transducer which will start the machine automatically when the spray gun trigger is pulled, and shut down the machine when the trigger is released. it will totally prolong the lifetime of the machine and get better spraying performance.

Speed regulator and pressure regulator are available in the machine for easy adjusting.

The sprayer use a durable plywood wooden case package.

The texture sprayer equipment use a durable peristaltic pumping tube for pumping out the heavy material like texture, gypsum, cement plaster, etc. even the material contains the big grains up to 3mm

The peristaltic pump use a brushless DC motor which is powerful and intelligent so as to pump the material to high spraying area.

What’s peristaltic pump?

Peristaltic pump is type of displacement pump / transfer pump which is used for pumping out a variety of fluid material, it doesn’t matter it contains sands / particles or not, but it must be flowable. The peristaltic pumps are also commonly known as roller pumps. The fluid material is sucked into a flexible rubber tube which located inside a circular pump casing. A rotor with 3 “rollers”, attached to the external circumference of the rotor compresses the flexible tube. As the rotor turns, the part of the tube under compression is pinched closed thus forcing the fluid material to be pumped to move through the rubber tube. Additionally, when the tube return to its natural state after the passing of the cam (“restitution” or “resilience”) fluid flow is induced to the pump. This process is called peristalsis and is used in many biological systems such as the gastrointestinal tract. Typically, there will be 2 or 3 rollers, occluding the tube, trapping between them a body of fluid. The fluid is then transported out at high pressure, toward the pump outlet. Peristaltic pumps may run continuously, or they may be indexed through partial revolutions to deliver smaller amounts of fluid. please note the tube inside is a specially made tube, durable and constant using. of course this tube is a worn part for this pump also.