+8618858210064Airless line striper is a new equipment specially designed for the road line marking, zebra line painting, football field marking, parking lot striping, shopping mall or commercial area line painting etc.
There are 2 types of road line paint, which is cold paint and hot paint. The cold paint is sprayed by the airless line striper like DP6325L (for 1 spray gun, 1 line painting), DP6335L (equipped with 2 spray guns, 2 lines), or the LC880 powered by hydraulic pump which is more powerful and last longer lifetime, it’s designed for high way / express way heavy paint.
all these cold paint sprayer machines could be attached with the glass bead dispenser, which would spread the glass bead equally onto the surface of the painted line.
How to use the airless line striper ?
Using an airless line striper machine requires a few steps like below:
1 Fill the paint tank with the desired paint color: Open the paint tank and fill it with the paint. Make sure not to overfill it as this can cause the paint to leak out during the job.
2 Adjust the pressure and fan size: Adjust the pressure on the machine to the correct setting, depending on the type of surface you are painting. You can also adjust the fan size to control the width of the line you are painting. Normally we need spraying pressure more than 150bar 2200psi for the road painting, and the tip size is normally 419 or 421, that means the tip size is 0.019 or 0.021 inch.
(1)Turn prime valve down. (2)Turn pressure control counterclockwise to correct pressure. (3)Set pump switch to OFF.
3 Start the machine: Turn on the machine and wait for it to build up pressure. The machine should start to spray the paint in a steady atomization so as to make sure the line painted is equal and with sharp edge.
Start steps: (1) Open the fuel valve lever. (2) Move the throttle lever away from the gas tank. (3) Close the engine choke lever. (4) Holding the frame with one hand, pull the starter rope rapidly and firmly. Continue to hold the rope as you let it return. Pull and return the rope until the engine starts. (5) Set pump switch to ON. Increase pressure enough to start pump. Allow fluid to circulate for 15-30 seconds.
4 Begin painting: Start painting the lines by holding the machine steady and moving it at a consistent speed. Try to keep the distance between the machine and the surface constant to ensure an even line.
5 Stop the machine: Once you are finished painting, rease the trigger and turn off the gas engine and wait for the pressure to release. Clean the machine thoroughly to prevent paint from drying inside the nozzle.
Note: Always make sure to wear appropriate safety gear, such as goggles and gloves, when using an airless line striper machine. Additionally, always read the manufacturer’s instructions for your specific machine before using it.
There may be some differences in the use of different models, we will provide operation manual so that you can use our machines correctly.
which brand line striping machine is recommended?
There are several brands that make high-quality line striping machines. Some of the more popular and well-regarded brands include:
1 Graco: Graco is a well-known brand in the paint equipment industry and offers a range of airless line stripers for both professional and DIY use.
2 Titan: Titan is another brand that produces durable and reliable line stripers, including both airless and air-powered options.
3 Wagner: Wagner is a trusted brand that offers a variety of line striping machines, including electric and battery-powered options.
4 DP Airless: DP Airless is a brand that specializes in airless paint sprayer and line striping equipment and offers a range of machines for various needs and budgets. DP can offer the gasoline engine powered and battery powered, piston pump and diaphragm pump, different types, Both line striping machine and line booster / driving type line striper all are available also.
- Related products
- Related posts
- Comments
- FAQ
-
X-6L Grass Line Marking Machine, Football Pitch Line Marking Machine
-
DP-6325L Airless Road Line Striper Machine
-
DP X24L New Airless Line Striper
-
What’s an airless line striper?
-
DP-6335LSP Ride-on Gas airless line striper
-
DP-3200LB Ride-on Thermoplastic Line Striper / Ride-on Thermoplastic Line Marking Machine / Line Booster
-
DP-980L Road Line Marking Machine with Diaphragm Pump
-
DP-LC880TD Two components Hydraulic Airless Line Striper with Reflective Bead Dispensing System
Leave your comments
FAQ regarding our business
Q1: What's your MOQ minimum order quantity for formal order?
A: Our MOQ is 10-100 units depends on the model. For small pump or spray guns , the MOQ is 100. and for large capacity pump, the MOQ could be 10. We can accept 1 or 2 units for sample testing order.
Q2: What's your payment terms?
A: We could accept L/C, T/T and Paypal or Western Union, also accept the payment against B/L copy . We can offer credit payment term for our long year cooperated representatives.
Q3: What is the lead time?
A: Sample order: 3-5days, mass production 20-40 days for the formal order.
Q4: Can we put our logo on your products? Is there extra charge for it?
A: Yes, we accept the OEM order based on the order quantity. The color box package need extra cost for less container order.
Q5: What's your warranty?
A: our warranty is 12months limited warranty except the easily worn parts. and for the motor we offer 2 years warranty.
Q6. Which port do you ship your machines?
A: We ship from Ningbo port China. for the FOB price, we will bear the local freight charge and the forwarder fee / customs fee, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be beared by the buyer (or importer).
Q7. how can i buy your products?
A: if you're final user, please leave your mobile phone number to us, and we will ask our distributor / dealer to call you directly. if you want to be our distributor or representative, welcome to contact us by email or whatsapp. we can talk more details one by one, we're sure you would be satisfied with our quality / service and price.
