what’s airless spray gun?

Airless spray gun is a high pressure spray gun compare to conventional air spray gun. It has spraying pressure up to 2000psi or 3000psi and usually use forged aluminum alloy body, stainless valve seat, and have filter before the fluid enters into an airless spray gun. They also have different tip sizes for spraying different materials such as paint, silicone and adhesives etc.

The Airless Spray Gun is a high pressure spraying tool that uses an airless pump to allow high speed and large amounts of fluid to pass through the gun without any loss. It comes with a variety of nozzle diameters and tip sizes that can be used to spray different materials ranging from low to high viscosity, such as polyurethane, epoxy, latex paints and adhesives etc.

A high pressure airless spray gun is for high pressure applications, such as wall coating and high-build deck coating. The high-pressure pump deliver paint to the spray gun quickly, so as to make sure the spraying finish is uniform and with minimal overspray. The airless spray gun is high-performance tool that delivers a finer finish than conventional spray guns since it uses less paint and fewer passes over the surface of your project.

Airless spray gun can spray paint at a pressure of up to 3000 psi. They are used for high-pressure painting and coating applications, such as metal and concrete coating, wall and roofing paint, floor and fence spraying, garage or door coating etc. It will produce a mist of paint. No matter the fluid is lower viscosity materials such as wood stain, shellac, lacquer, and varnish, or high viscosity like putty, epoxy, elastomeric paint, block filler, primer, or even plaster, it can apply an even coat of a product on a larger surface.

Below is the information about the tip size and different filter for spraying different material from thin to heavy coating.