PB-10 Plaster Box

PB-10 Plaster box is the Aluminum Alloy Drywall Tool 9” Flat Finishing Box, designed to apply the correct amount of joint compound over taped, flat joints when used in conjunction with a box handle. The adjustable blade dial allows you to get the exact finish desired. It is the ideal size for almost all applications.

Function of the plaster box:
1. Smooth roller design for easy mounting on the wall surface

2. The pressure of the top head is adjustable for apply different shapes or corner

3. The degree of plaster box and bar is adjustable

4. The degree between the surface and the bar is adjustable & locked

5. Telescope design to meet the different length

How to Assemble the plaster box:

1. Make sure the plat box blade is the thickness of a fingernail(1-1.5mm) above the skids. The blade can be adjusted using screws on the blade holder to obtain the necessary height;
2. Test that the blade holder can move up and down freely;
3. Attach your plat box handle by sliding it onto the box and tightening the two wing nuts;
4. Adjust the tension on the blade holder to suit the gauge of the compound which is to be used in the machine;
5. Assemble with the handle.

How to Use the plaster box

1. Set the box at a slight angle from the handle and tighten the button to fix the angle so the head remains stationary.
2. Place the flatbox on the joint, and while applying pressure, release the button allowing the box and the handle to find its own natural position.
3. Adjust the length of the handle: push the button to extend the length(Max. 63.8”).

Maintenance of the plaster box
To protect and lubricate your flat box, use a silicon spray. Do not use solvents to clean your plat box as it will damage the wiper seal and reduce performance. Regular wear parts should be replaced as needed.

Specifications of the plaster box
Length of Flat Box: 22.5cm(8.9in)
Length of Handle(Adjustable in 4 Position): 102-162cm(40-63.8in)
Package Size: 106x26x17cm(41.7×10.2×6.7in)
Gross Weight: 3.7kg(8.2lbs)