Airless Disinfectant Sprayer For Sanitzing And Disinfecting

Since first being recorded, the Covid-19 has spread around the world in most countries, and it had been declared a pandemic by the World Health Organization.

In addition to direct human-to-human transmission, contaminated surfaces also pose a risk of transmitting viruses and pathogens.

Especially in the current COVID-19 pandemic, this is of great importance: Studies show that Covid-19 viruses can survive for several days on surfaces that we come into daily contact with.

Where can spray disinfection be used?

Particular attention must be paid to areas in daily use, as well as to areas frequented by people who are or were already ill.

Office Spaces/Conference room

Restaurants and food preparation areas

Public transport(bus, subway, train, station etc)

Schools

Healthcare Center

Fitness places

With which products is disinfection possible?

1.SMALL SURFACES

Model No.		DP-003	DP-018	DP-032	DP-008
Voltage		220V~50Hz / 120V~60HZ	220V~50Hz / 120V~60HZ	220V~50Hz / 120V~60HZ	220V~50Hz / 120V~60HZ
Rated Power		600W	450w	600W	700W
Water Flow Rate		800ml/min	1000ml/min	1000ml/min	1400ml/min
Max. Viscosity		60 DIN-s	50 DIN-s	60 DIN-s	60 DIN-s
Nozzle Size		Φ2.0mm	Φ2.6mm	Φ2.5mm	Φ1.8mm / Φ2.5mm
Paint Cup Capacity		800ml	1400ml	800ml	800ml
Air Hose Length		1.5 meters	NA	1.8 meters	3.0 meters
Cordset		1.8meters	1.8meters	2meters	2meters

2.MEDIUM SIZE SURFACES

Item No.	X6(Standard)		X6V(Hopper type)			X6H(Cart type)
Power supply	220v/50hz or 110v/60hz		220v/50hz or 110v/60hz			220v/50hz or 110v/60hz
Motor power	650W Universal Motor		650W Universal Motor			650W Universal Motor
Max.Flow rate	1.4L/MIN		1.4L/MIN			1.4L/MIN
Max. tip size	0.019″		0.019″			0.019″
Max.Working pressure	200bar/2900psi		200bar/2900psi			200bar/2900psi
Net/Gross weight	5.7/8.7kgs		6.5/8.8kgs			11.5/15.5kgs
Contents	X-450 Gun, X 517 Spray Tip, X Guard,1/4 in x 7.5M Airless Hose, 30cm extension pole, Wrench kit, brush, and manual.		5L Hooper with lid, X-450 Gun, X 517 Spray Tip,X Guard, 1/4 in x 7.5M Airless Hose, 30cm extension pole, Wrench kit, brush, and manual.			X-450 Gun, X 517 Spray Tip, X Guard, 1/4 in x 7.5M Airless Hose, 30cm extension pole, Wrench kit, brush, and manual.

3.LARGE SURFACES

Item No.	SP450		X20			X980(Diaphragm pump)
Power supply	220v/50hz or 110v/60hz		220v/50hz or 110v/60hz			220v/50hz
Motor power	1000W PMDC Motor		1100W PMDC			1500W Induction motor
Max.Flow rate	1.8L/MIN		2.0L/MIN			3.6L/MIN
Max. tip size	0.021″		0.021″			0.023″
Max.Working pressure	200bar/2900psi		200bar/2900psi			220bar/3190psi
Net/Gross weight	13.5/19.5kgs		14.9/20.1kgs			38.0/45.5kgs
Contents in package	DP-6371 airless spray gun with 517, 1/4” 13M high pressure hose, 45cm extension pole, lubricating oil. And manual.		X-450 Gun, X 521 Spray Tip, X Guard, 1/4 in x 15M Airless Hose, 45cm extension pole, lubricating oil. wrench set,pressure gage and manual			X-450 Gun, X Spray Tip, X Guard, 1/4 in x 15M Airless Hose, 45cm extension pole, pressure gage, wrench set, lubricating oil and manual

What can be disinfected?

Spraying technology allows a comprehensive surface coating with disinfectant

subsequently the microbial presence of bacteria, fungi or viruses can be reduced.

Disinfectants in liquid form, which are at least limited virucidal, are suitable for application to surfaces by spraying.

Disinfectant types: Based on alcohol, aldehydes, biguanides, bisphenols, diamidines, peroxygens, phenolics, quaternary ammonium salts and halogen-releasing compounds.

Whom is suitable for spraying disinfection?

The Spraying of Disinfection solutions is commonly undertaking by the following groups:

Cleaning & Sanitation Providers

Health and Care Providers

Municipality Workers

Janitors, Commercial and Residential Facility Managers

Safety authorities: Military and Reservists

How does spray disinfection of surfaces work?

Setup

Tighten the connections on the device firmly and check the seal of the device with water before using it with disinfectant.

Evacuate the water.

Fill disinfectant into the hopper or place suction system directly in the material container.

Pressure setting: 70-100 bar

Nozzle selection: (recommendation 515,617,619)

When using other nozzles, the application speed must be adjusted

Apply disinfectant quickly and evenly to the surfaces according to the material recommendations.

Please refer to the manufacturer’s instructions for exposure times of the disinfectant you are using.

Safety Instructions

Please observe the following safety instructions before use:

Always wear the necessary personal protective equipment (PPE, see safety data sheet of the device: gloves, goggles and mask).

Never point the fluid stream at people or animals – there is a risk of injury.

Thoroughly read the operating instructions of the machine as well as the safety data sheet of the material and follow the instructions contained therein.

Do not spray any electrical devices and equipment.

Check the filters in the gun and sprayer daily after each use and clean or replace as necessary.

When using flammable liquids, the machine must be operated outside the room where the spraying occurs (danger zone = 5 m distance from the application area).

If flammable disinfectants are used, sufficient ventilation must be ensured. Furthermore, no warm or hot surfaces are to be disinfected. If possible, electrical systems should be switched off and light switch operations prevented. There is a risk of explosion!